Icom IC-T10

The Icom IC-T10 is a rugged, commercial-grade VHF/UHF amateur handheld radio. It features 5W output on the 144/430 MHz bands, an IP67 waterproof/dust-tight rating, and a 1500mW speaker for loud audio.

 

Description

Features:

5W RF Output in 144 and 430 MHz

1500 mW Loud and Intelligible Audio

IP67 Dust-tight and Waterproof

Home Button on the Top Panel for Quick Access to Calling Channel

Optional HM-222HLWP, Loud Audio SP-MIC

FM Broadcast Receiver

Up to 11 Hours* Operating Time

Other Features:

  • DC power operation with optional AD-149H
  • Free CS-T10 downloadable programming software
  • Built-in CTCSS/DTCS for repeater operation
  • Total of 208 memory channels with 6 character channel name
  • 16 DTMF autodial memories
  • Priority, Program, Memory, Skip, and Tone Scan
  • Direct-conversion system eliminates IF stages

General:

IC-T10
Frequency coverage USA Version TX 144–148, 430–450 MHz*(* Working range)
RX 136–174, 400–479 MHz*(* Working range)
FM broadcast 88–108 MHz
Export Version TX 136–174, 400–479 MHz*(Working range)
RX 136–174, 400–479 MHz*(Working range)
FM broadcast 76–108 MHz
EUR Version TX 144–146, 430–440 MHz
RX 136–174, 400–479 MHz*3 (* Working range)
FM broadcast 76–108 MHz
Number of channels 208 channels (including 2 call and 6 scan edges)
Type of emission F2D, F3E (FM)
Frequency stability ±2.5 ppm (–20°C to +60°C on the basis of 25°C )
Power supply requirement
External DC power
7.2 V DC nominal

10–16 V DC (with AD-149H)

Current drain (approx.) Tx High Less than 2.5 A
Rx Max. audio Less than 600 mA
Antenna impedance 50 Ω (SMA)
Operating temperature range –20°C to +60°C
Dimensions
(W × H × D, Projections not included)
52.2 × 111.8 × 30.3 mm,  2.1 × 4.4 × 1.2 in (with BP-280)
Weight (Approximate) 278 g; 9.8 oz (with BP-280 and antenna)

*1 Guaranteed range 144–148, 440–450 MHz
*2 Guaranteed range 144–148, 430–440 MHz
*3 Guaranteed range 144–146, 430–440 MHz

 

Transmitter

IC-T10
Output power 5 W, 2.5 W, 0.5 W
Max. frequency deviation ±5.0 kHz/±2.5 kHz (W/N)
Spurious emissions Less than –60 dBc (High, Mid),

Less than –13 dBm (Low)

Ext. microphone connector 3-conductor 2.5 (d) mm (1/10ʺ)/2.2 kΩ

RECEIVER

IC-T10
Receiver sensitivity Less than 0.18 μV (at 12 dB SINAD)
Squelch sensitivity Less than 0.18 μV (at squelch threshold)
Adjacent channel selectivity More than 55 dB (FM, 25 kHz)
More than 50 dB (FM Narrow, 12.5 kHz)
Spurious response More than 60 dB
Audio output power
(at 5% distortion, 8 Ω load)
Internal SP 1500 mW (typical)
External SP 450 mW (typical)
HM-222HLWP 1500 mW (typical)
Ext. speaker connector 3-conductor 3.5 (d) mm (1/8ʺ)/8 Ω

All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Standard MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D -E and -F.

Ingress Protection Standard
Dust & Water IP67 (Dust-tight and waterproof protection)

Reviews

There are no reviews yet.

Your email address will not be published. Required fields are marked *